Carpet Stain Removal – Here’s How Not To Do It.

 

This Carpet Stain Removal Approach Is NEVER Going To Work.

 

The lady in the video has tried numerous solutions on this one carpet stain. So far, no joy. Her carpet stain removal method has not worked.

Can you imagine what just happened when the carpet was soaked through? Can you see that the stain in the carpet is likely to have gone all way through to the carpet backing now?

If I was to impart just a morsel of my carpet stain cleaning knowledge to you, it would be this… PLEASE DON’T TRY TO TACKLE CARPET STAINS AS SHOWN IN THE VIDEO.

Cleaning stains from carpet its best acting more timidly. A suitable hand brush, rocking, working in from the outside edges of the carpet stain. Using an appropriate carpet stain remover solution is always best. Identify the stain and then call up your local janitorial supplier or carpet cleaning supplies store. If you get a product from your local suppliers, be sure to follow label instructions. If the solution from your local suppliers fails to remove the stain, its doubtful you’ll find better elsewhere.

To give you some idea of the type of carpet stain remover solutions  available, click here for Carpet Stain Removers.

 

To Remove Carpet Stains Thoroughly,,,,,, Just Wait.

 

Wait until your cleaning your carpets yourself. Then be sure to use a rinse solution after you’ve pre-sprayed and brush agitated your carpet stains. When you tackle stains, rinse out the stain remover solutions after application. Carpet staining is always best to remove when the carpet is being cleaned. Your likely to have a rinse solution then, which will neutralize your carpet PH and prevent colour changes and re-soiling

If your not DIYing,Then your local carpet cleaner will have solutions to tackle the stains. Simply tell the technician what the stains are when you make your booking. It always helps if you know what the stain is. That way, the appropriate solution can be applied and the stain will then extract. If it does not, then the chances of it being permanent is high.

Do check out the stain remover products by clicking the link above. You’ll have some idea as to what products are available. Most carpet stains can be removed but there is always the odd few which are set and sadly, permanent.

Remember, if you are DIY carpet cleaning, that’s the best time to clean up carpet stains. Have the equipment at the ready on the day. Be sure to have the appropriate carpet stain remover solution. Take your time and follow guidance. You can do it if you try.

Cig Burns In Carpet.

Cig Burns In Carpet?

Here’s How Best To FIX It.

 

When I was actively cleaning carpets every day, often cig burns would show. A cig burn here and there would really spoil the look of nice clean carpets. I often wondered about how to fix these cig burns in my customers carpets.

  • I thought about putting a dash of paint onto the carpet cig burn.
  • I also thought about cutting out the burned fibers from the carpets.

None of the above carpet cig burn fixes was effective. This next one, however, was!

If you use a smear of glue and you paste the burned area of your carpet, then wait. Let the glue become tacky before you stick on some carpet fibers. Keep putting on the fibers until you have your carpet mended.

 

You’ll need to use an old piece of carpet which you don’t use anymore. A remnant, for cutting out some carpet fibers. If you don’t have any spare carpet, then you can cut some fibers out from the edges of your carpet. Do this behind a couch or someplace where it won’t be noticed.

 

Cut out some carpet fibers then paste them into the cig burn.

 

You can cut out a lot of carpet fibers from different areas of your carpets. Then paste them in onto the burn. But be sure to glue the carpet fibers in while the glue is nice and tacky.

When the carpet has dried, you can scissor the fibers so that they are all even in length. Do this using the scissor points and just cut a small area at a time. Set the pile using a white hand towel. Simply just set the carpet pile so that it flows all in one direction.  Just like combing the pile only your using a hand towel.

Using this idea, you must be quick. Paste the fibers into the burnt areas while the glue is tacky. You can use a pair of tweezers or simply just paste the fibers in with your fingers. Just be very careful and gentle, but do be quick. Obviously you don’t want glue on your hand so do be extra careful when pasting in your carpet fibers.

Please let me know how you get  on with this idea. Your comments are valued.